CO2 Laser Compatible Materials
Here are some of the materials we can work with using our Epilog Helix Laser.
| Material |
Engrave | Cut |
|---|---|---|
| Wood | YES |
YES |
| Acrylic | YES | YES |
| Fabric | YES | YES |
| Glass | YES | NO |
| Coated Metals | YES | NO |
| Ceramic | YES | NO |
| Delrin | YES | YES |
| Cloth | YES | YES |
| Leather | YES | YES |
| Marble | YES | NO |
| Matte Board | YES | YES |
| Melamine | YES | YES |
| Paper | YES | YES |
| Mylar | YES | YES |
| Pressboard | YES | YES |
| Rubber | YES | YES |
| Wood Veneer | YES | YES |
| Fiberglass | YES | YES |
| Painted Metals | YES | NO |
| Tile | YES | NO |
| Plastic | YES | YES |
| Cork | YES | YES |
| Corian | YES | YES |
| Anodized Aluminum | YES | NO |
| Stainless Steel | * | NO |
| Brass | * | NO |
| Titanium | * | NO |
| Bare Metals | * | NO |
| * CO2 lasers will mark
bare or highly polished metals when coated with a metal marking solution. For more information, email us at info@digipointe.com. WARNING: We cannot cut or engrave on any material containing or made of PVC or Polycarbonate (Lexan). Cutting or engraving these materials releases highly dangerous gases. PVC releases chlorine gas which is highly corrosive and deadly if inhaled. DigiPointe LaserWorks will not cut or engrave either of these materials. If you are unsure of the composition of your plastic product or material we can submit it for testing. For additional information, email us at info@digipointe.com | ||